Lenze EVS93xx CrossCutter - Manual (Page 221)

Cross Cutter
Appendix
Prepared Solution Servo PLC / ECSxA 1.1 EN 6-53
Possible settings: Code
Default Selection
Comment
Application status word bit 0: System error
TRUE An error is pending.
C4150/
000
Bit 0
- - - -
FALSE No errors are pending.
Application status word bit 1: Following error warning
TRUE A following error warning is pending.
C4150/
000
Bit 1
- - - -
FALSE No following error warnings are pending.
Application status word bit 2: Following error
TRUE A following error is pending.
C4150/
000
Bit 2
- - - -
FALSE No following errors are pending.
Application status word bit 3: Positioning in progress.
TRUE
Positioning in progress.
C4150/
000
Bit 3
- - - -
FALSE Positioning not in progress.
Application status word bit 4: Positioning target position reached.
TRUE Target position reached.
C4150/
000
Bit 4
- - - -
FALSE Target position not reached.
Application status word bit 5: System locking to motion profile.
TRUE Locking to motion profile in progress.
C4150/
000
Bit 5
- - - -
FALSE Locking to motion profile not in progress.
Application status word bit 6: System has locked to motion profile.
TRUE Locking to motion profile completed successfully.
C4150/
000
Bit 6
- - - -
FALSE System has unlocked from motion profile.
Application status word bit 7: Mark correction active.
TRUE
Mark correction active.
C4150/
000
Bit 7
- - - -
FALSE Mark correction not active.
Application status word bit 8: Calculation sequence for new cross-
cutter motion profile for a new cutting length in progress.
TRUE
Calculation sequence for cross-cutter motion profile
for a new cutting length in progress.
C4150/
000
Bit 8
- - - -
FALSE Calculation sequence for new cross-cutter motion
profile for a new cutting length completed
successfully or aborted.
Application status word bit 9: Calculation sequence for new cross-
cutter motion profile for a new reject length in progress.
TRUE
Calculation sequence for cross-cutter motion profile
for a new reject length in progress.
C4150/
000
Bit 9
- - - -
FALSE Calculation sequence for new cross-cutter motion
profile for a new reject length completed successfully
or aborted.
Application status word bit 10: Calculation sequence for new
cross-cutter motion profile for a new test length in progress.
TRUE Calculation sequence for cross-cutter motion profile
for a new test length in progress.
C4150/
000
Bit 10
- - - -
FALSE Calculation sequence for new cross-cutter motion
profile for a new test length completed successfully or
aborted.