1 wiring the control terminals, Wiring the control terminals -99, Cross cutter – Lenze EVS93xx CrossCutter User Manual

Page 113

Text mode
Original mode

Cross Cutter

Installing and starting up the "CrossCutter" prepared solution

Prepared Solution Servo PLC / ECSxA 1.1 EN

3-99

3.3.1

Wiring the control terminals

Figure 40: Control terminal wiring plan for 9300 Servo PLC

Figure 41: Control terminal wiring plan for ECS

Caution!

Digital input DIGIN_bIn1_b using 9300 Servo PLC or DIGIN_bIn4_b using ECS is inverted via the code
initialisation values (see Chapter 6.2.2) in order to achieve wire-break protection (0 V = QSP).

Caution!

The connection plan above shows the wiring that is fundamentally required specifically in order
for the prepared solution to function correctly.