Lenze EVS93xx CrossCutter - Manual (Page 10)

Cross Cutter
Preface and general information
Prepared Solution Servo PLC / ECSxA 1.1 EN 1-6
1.4.1 Parameterisable variant
In the parameterisable variant, all basic functions and the selection of interface signals are set
solely via parameters (codes). This provides the user with a standardised predefined interface.
Typical signal wirings, terminal assignments, interfaces to data bus systems, etc. can be
selected via parameters (codes). This means that the parameterisable variant of the prepared
solution can reduce installation and start-up times to a minimum without restricting the
functionality of the prepared solution:
= Internal program sections of the prepared solution
= Sections of the prepared solution which can be adapted by the user
When using a prepared solution, the system is configured entirely using code (parameter-
setting interface). The functions of the individual codes used in the context of parameter setting
are listed in Chapter 6.2.1.