Eppendorf epBlue with MultiCon User Manual
Epblue™ with multicon
Table of contents
Document Outline
- Software manual
- 1 Operating instructions
- 2 Product description
- 3 Operation
- 4 epBlue Application Runner - Carrying out the application
- 4.1 Opening an application
- 4.2 Preparing the application run
- 4.2.1 Selecting the device
- 4.2.2 Entering the sample quantity
- 4.2.3 Setting the HEPA air filter and the UV lamp
- 4.2.4 Placing the labware on the epMotion worktable
- 4.2.5 Setting the run parameters for the optical sensor
- 4.2.6 Setting the ID tracking parameters
- 4.2.7 Entering the filling level of the labware
- 4.3 Starting the application
- 4.4 Controlling the application
- 4.5 Ending the application
- 5 epBlue LogViewer - Managing logs
- 6 epBlue Application Editor - Creating and editing applications
- 6.1 Overview
- 6.2 Creating an application
- 6.3 Commands
- 6.3.1 Sample transfer command
- 6.3.2 Reagent transfer command
- 6.3.3 Dilute command
- 6.3.4 Pool command
- 6.3.5 Pool one destination command
- 6.3.6 Comment command
- 6.3.7 Exchange command
- 6.3.8 Magnetic separation command
- 6.3.9 Mix command
- 6.3.10 Number of samples command
- 6.3.11 Temperature command
- 6.3.12 Thermomixer command
- 6.3.13 Vacuum command
- 6.3.14 Transport command
- 6.3.15 User intervention command
- 6.3.16 Wait command
- 6.3.17 Importing commands from a CSV file
- 6.4 Pattern
- 6.5 Optical sensor
- 7 epBlue Application Editor - Managing applications and folders
- 8 epBlue Labware Editor - Creating and managing labware
- 9 epBlue simulation - Simulating applications
- 10 epBlue ID - Working with ID tracking
- 11 epBlue settings - Checking components and making the basic settings
- 12 epBlue settings - Creating and managing users
- 13 epBlue Settings - Saving data and creating print templates
- 14 epBlue - Software error messages
- 15 Ordering information