Eppendorf epBlue with MultiCon - Manual (Page 126)

epBlue settings - Checking components and making the basic settings
epBlue™ with MultiCon
English (EN)
126
The current status will be displayed in the State area.
You can make settings in the Set Temperature area.
1. Enter the set temperature in the New Temperature field.
2. Enter the mixing time in the New time field.
3. Press the Start button.
The thermomixer tempers the labware to the set temperature. If the temperature is reached before the
mixing time has elapsed, the thermomixer maintains a constant temperature until the end of the test.
11.8 Magnetic separation
The Magnetic Separation function can be used to check the magnetic finger module.
Abb. 11-8: Magnetic Separation function
Fig. 11-8: Magnetic Separation function
Home
Move the magnetic finger module to the home
position.
Draw Out
Draw out the magnetic fingers.
Draw In
Draw in the magnetic fingers.