Eppendorf epBlue with MultiCon - Manual (Page 62)

epBlue Application Editor - Creating and editing applications
epBlue™ with MultiCon
English (EN)
62
6.3.7 Exchange command
Abb. 6-16: Exchange command
Fig. 6-16: Exchange command
The Exchange command can be used to exchange labware. When the command is executed, epBlue
prompts you to replace the labware manually.
6.3.8 Magnetic separation command
The Magnetic separation command can be used to separate magnetic beads using the magnetic finger
module.
The Magnetic separation command can only be executed if the PrepRack is positioned on the thermomixer
of the epBlue worktable.
The efficiency of the magnetic separation depends on the properties of the used beads. Eppendorf AG
recommends a
Duration of at least 2 min as the initial value.
The command Exchange only is available for epMotion 5070.
Labware drop-down menu
Labware taken out of the epMotion
Exchange with drop-down menu
Labware to be placed inside the epMotion
The Magnetic separation command only is available for devices with magnetic finger module.