Eppendorf epBlue with MultiCon - Manual (Page 108)

epBlue Labware Editor - Creating and managing labware
epBlue™ with MultiCon
English (EN)
108
8.5.13 Thermoadapter
Labware types in epBlue: Adapter > Thermo
In the software you can find the Thermoadapter LC Sample+Cartridge under Thermoblocks with plates.
The thermoadapter and plate combination is created during the editing of the worktable or via a transport
command.
With the "Thermoadapter with skirted PCR plate" combination, the plate can be transported by the gripper.
The thermoadapter cannot be transported by the gripper.
For the Thermoadapter Frosty, select a skirted PCR plate for the location. The cooling aggregate is not
named in epBlue. In the software, the Thermoadapter Frosty can be found under
Adapter > Height .
8.5.14 Thermoblocks
Labware types in epBlue: Thermoblocks with PlatesThermoblocks with Plates
Thermoblocks are permanent labware combinations and cannot be changed.
The "Thermoblock with plate" combination can be transported by the gripper.