Eppendorf epBlue with MultiCon - Manual (Page 113)

epBlue ID - Working with ID tracking
epBlue™ with MultiCon
English (EN)
113
10.3 Reading IDs into epBlue
IDs can be entered manually when starting an application. To do so, enter the IDs by hand or read them
using the barcode reader. Alternatively, you can use an ID list as an entry list.
Tab. 10-3: Differences when entering IDs
Example: You are using a plate as destination labware. The manual scan option is set. When the application
starts, you scan the ID of the plate manually. After the application is complete, you receive a result list for
the plate. The result list contains the ID of the plate and the IDs of the used wells.
Labware Enter IDs manually Use the entry list
Plate One ID per plate. One ID per plate.
One ID per used well.
Rack The rack does not have an ID. The rack does not have an ID.
Rack with vessels One ID per used vessel.
1 or 2 IDs if reagents are used. One or several IDs per used vessel.
1 or 2 IDs if reagents are used.