Eppendorf epBlue with MultiCon User Manual
Page 33
epBlue Application Runner - Carrying out the application
epBlue™ with MultiCon
English (EN)
33
Tab. 4-1:
Meaning of the columns in the Volume table
Proceed as follows:
Enter the filling volume into the
Start Volume
column.
To enter the same volume for the entire labware, click on the title in the
Volume
column.
Enter the run parameters of the optical sensor in the
Liquid detection
area, if necessary.
Press the
Run
button.
Column
Meaning
Red border
Entry of an invalid volume. Invalid volumes are volumes that are smaller than the
required volume or larger than the maximum volume of the labware.
Position
Position of the labware on the worktable.
Minimum volume
Volume that is required for this run.
Start Volume
Actual volume in the labware.
Maximal Volume
Maximum volume the labware can be filled with.