Eppendorf epBlue with MultiCon - Manual (Page 15)

Operating instructions
epBlue™ with MultiCon
English (EN)
15
S
SafeRack
Rack with ep.T.I.P.S. Motion pipette tips. The SafeRack features a partition that prevents the contamination
of adjacent tips. Use the SafeRacks if you would like to use tips several times.
Source labware
Rack or plate with source positions.
Source location
Position in the labware that liquid is aspirated from exclusively during the application.
T
Thermal module
Thermal module for labware that is integrated in the worktable.
Thermoadapter
Heat-conductive adapter for holding plates.
Thermoblock
Thermoadapter that is permanently connected to a PCR plate or PCR vessel.
Thermorack
Temperable rack for smaller vessels, e.g., Safe-Lock tubes for 0.5
mL, 1.5 mL or 2 mL.
V
Vacuum unit
The vacuum unit uses a vacuum to suck liquid from a filter plate. The vacuum unit consists of a vacuum
manifold, vacuum pump and Vac Frame.
Vessel
Tube or single well of a plate.
W
Working volume
Liquid volume for a labware. The epMotion fills a vessel with low levels of contamination up to the working
volume. The working volume is less than the filling volume.
Worktable
epMotion work surface where labware and tools are placed. In the software, the epMotion worktable is
shown as the epBlue worktable.