Eppendorf epBlue with MultiCon - Manual (Page 110)

epBlue simulation - Simulating applications
epBlue™ with MultiCon
English (EN)
110
9.1.2 Controlling the simulation
Abb. 9-1: Simulation window
Fig. 9-1: Simulation window
Prerequisites
• The simulation has started.
1. You can control the simulation with the following symbols:
Tab. 9-1: Symbols for controlling a simulation
Symbol Meaning
Set the speed of the simulation.
You can set a speed from 1 – 10x. The figure 1 corresponds to real time. The figure 10
means 10 times faster than real time.
Start the simulation.
Perform a simulation step by step.The simulation stops after the next step.
Interrupt a simulation.
Cancel a simulation.
Exit the simulation. The simulation window is closed.