Eppendorf epBlue with MultiCon - Manual (Page 14)

Operating instructions
epBlue™ with MultiCon
English (EN)
14
L
Lab administrator
User who has the rights to administrate applications and labware.
Labware
Racks, plates, tips, etc. which are placed on the worktable.
Location
Area where labware is placed on the worktable.
M
MagSep
System consisting of the magnetic finger module, thermomixer and PrepRack and reagents for nucleic acid
preparation with the epMotion.
MultiCon
epMotion operator panel. You can control your epMotion using the control unit and the epBlue software.
P
Pattern
Pattern in which liquid is aspirated and dispensed. Patterns are defined in a transfer command. Patterns are
defined as regular patterns and irregular patterns. Patterns are independent in x-direction and y-direction.
Procedure
Sequence of commands that are executed one after the other. Part of an application.
R
Rack
Mount for tubes or pipette tips.
Remaining volume
Volume that cannot be aspirated from a vessel. The distance from the pipette tip to the vessel base, defined
in the software, and the defined immersion depth of the pipette tip in the liquid, must be observed.
Therefore, the pipette tip cannot aspirate the volume. The remaining volume depends on the vessel
geometry.
Reservoir
Reservoirs are used to hold reagents. Reservoirs are hung in a ReservoirRack or placed directly on the
worktable.
Result list
ID list with information on destination labware and intermediate labware. The result list contains the IDs of
destination positions and intermediate positions. epBlue creates a result list for each destination labware
and intermediate labware for which ID tracking is active.