2 preparing the application run, 1 selecting the device, Preparing the application run 4.2.1 – Eppendorf epBlue with MultiCon User Manual
Page 26: Selecting the device
epBlue Application Runner - Carrying out the application
epBlue™ with MultiCon
English (EN)
26
4.2
Preparing the application run
4.2.1
Selecting the device
Abb. 4-2: Selection of an available device
Fig. 4-2:
Selection of an available device
In the
Available devices
area, the connected epMotion is displayed.
Prerequisites
epMotion is ready for operation.
1. Select the device for the application run.
2. Press the
Next
button.
NOTICE! Tool collisions with incorrectly positioned labware.
Labware must be positioned on the epMotion worktable as defined in the application.
Tools and labware become damaged in a collision. A collision can lead to sample loss.
Check the positioning of the labware before starting the application.