Eppendorf epBlue with MultiCon - Manual (Page 129)

epBlue settings - Checking components and making the basic settings
epBlue™ with MultiCon
English (EN)
129
Abb. 11-11: Filter symbol in the status area
Fig. 11-11: Filter symbol in the status area
The HEPA air filter is switched on. The filter symbol appears in the status area.
The HEPA air filter remains switched on if you exit the HEPA filter function. Now start your application.
11.10.2 Switching off the HEPA air filter
Prerequisites
• The HEPA air filter is running.
• The
HEPA filter function on the epMotion serial number > Settings tab was selected.
1. Press the HEPA filter ON button.
The HEPA air filter is switched off.
2. Alternatively, you can switch off the HEPA air filter when you switch off the epMotion using the mains/
power switch.
11.11 Setting the barcode reader
The following settings are available for the barcode reader:
• Manual/Serial: Reading in barcodes by confirming the button on the barcode reader
• Presentation Mode : The barcode reader automatically scans for barcodes
Loading, saving or resetting the settings
• Load: checks the setting of the barcode reader
• Save: saves the setting of the barcode reader
• Set default: resets the barcode reader to factory settings