Avaya Cajun P550R - Manual (Page 83)

Chapter 4
4-8 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
set buffering port (hipri-service-ratio)
Command Mode
Configuration
Description
Set the output buffer high priority service ratio for a physical
port. The default setting is 1023-to-1.
Syntax
Table 4-7. Parameters, Keywords, Arguments
Sample Output
The following example sets the buffer high priority service
ration for physical port 4/1 to 15-to-1.
(configure)# set buffering port 4/1 output hipri-
service-ratio 15-to-1
Buffers for port 4/1 set.
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: set buffering port output hipri-
service-ratio {1-to-1|3-to-1|7-to-1|15-to-1| 31-to-
1|63-to-1|127-to-1|255-to-1|511-to-1| 1023-to-
1|2047-to-1| 4095-to-1|8191-to-1| 16383-to-1|32767-
to-1}
Name Definition
mod-port-spec Specifies the module and the port.
output The output buffer.
hipri-service-ratio The priority service ratios are: 1-to-1, 3-to-1,| 7-to-1,
15-to-1, 31-to-1, 63-to-1, 127-to-1, 255-to-1, 511-
to-1, 1023-to-1, 2047-to-1, 4095-to-1, 8191-to-1,
16383-to-1, or 32767-to-1.