Avaya Cajun P550R - Manual (Page 465)

Chapter 23
23-8 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
Systems
■
Avaya P550R and P880 Multiservice Switches, 80-series
modules only.
■
Avaya P580 and P882 Multiservice Switches
• Use the layer 2 priority in the
packet to classify all TCP traffic
that has a:
— Source IP address in the
5.5.5 subnet
— Destination IP address in
the 6.6.6 subnet
— Destination port that is less
than 2
• Permit TCP connections that
meet this criteria
access-list MyAccessList2 8
permit use-l2 tcp 5.5.5.0
0.0.0.255 6.6.6.0 0.0.0.255 lt 2
established
• Use the DSCP to classify all UDP
traffic that has a:
— Source IP address of 7.7.7.7
— Destination IP address of
8.8.8.8
— Destination port between
33 and 44
• Mask the three least significant
bits of the DSCP
access-list MyAccessList2 9
permit use-diffserv mask udp
host 7.7.7.7 host 8.8.8.8 range
33 44
• Assign a priority of 7 to all TCP
traffic that has a:
— Source IP address of 9.9.9.9
— Destination IP address of
3.3.3.3
— Destination port between
55 and 66
• Permit TCP connections that
meet this criteria
access-list MyAccessList2 10
permit use-priority 7 tcp host
9.9.9.9 host 3.3.3.3 range 55 66
established
Table 2. Examples: Extended ACL Rules
To . . . Enter . . .
3 of 3