Avaya Cajun P550R - Manual (Page 251)

Chapter 12
12-34 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
ipx type-20-propagation
Command Mode
Interface
Description
Specifies whether or not an IPX interface accepts and forwards IPX
type 20 propagation packet broadcasts. The no form of this
command reverts back to the default, which is both.
Syntax
Table 12-16. Parameters, Keywords, Arguments
Sample Output
The following example forwards type 20 propagation broadcast
packets to other network segments on an interface labeled “boston”.
(config-if:boston)# ipx type-20-propagation outbound
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: ipx type-20-propagation
To Disable: ipx type-20-propagation disabled
Name Definition
both|inbound|
outbound • both - The interface accepts and forwards type 20
propagation broadcast packets. This is the default.
• inbound - The interface only accepts type 20
broadcast packets.
• outbound - The interface only forwards type 20
propagation broadcast packets to other network
segments.
• disabled - The interface does not accept or forward
type 20 propagation broadcast packets.