Clear ipx route, Clear ipx route -3, Command mode – Avaya Cajun P550R User Manual
Page 220: Description, Syntax, Sample output, Systems
Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
12-3
IPX
clear ipx route
Command Mode
Configuration
Description
Deletes routes from the IPX routing table. This command only
deletes routes learned via the RIP routing protocol. Static and local
routes cannot be deleted using this command.
Syntax
Table 12-1. Parameters, Keywords, Arguments
Sample Output
The following example clears the entry for network 5 from the IPX
routing table.
(configure)# clear ipx route 5
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable:
clear ipx route {
Name
Definition
{network|default|*}
Delete routes learned via the RIP routing protocol from
the IPX routing table.
• network - The number of the network whose
routing table entry you want to display. This is an
eight-digit hexadecimal number that uniquely
identifies a network cable segment. It can be a
number in the range 1 to FFFFFFFD. You do not
need to specify leading zeros in the network
number. For example, for the network number
000000AA, you can enter AA.
• default - deletes the default route from the routing
table.
• * - Deletes all routes in the routing table.