Avaya Cajun P550R - Manual (Page 555)

Chapter 28
28-8 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
show ip route (static)
Command Mode
User
Description
Displays the IP static routes or the default gateway.
Syntax
Table 28-4. Parameters, Keywords, Arguments
Sample Output
The following command displays the ip static route information.
> show ip route static
0.0.0.0 0.0.0.0 via 192.168.0.1 cost=1
pref=low
Systems
Avaya P550R/P580/P880/P882 Multiservice Switches.
To View: show ip route [{static|default-gateway|local}] [addresses>][]
Name Definition
static|default-
gateway|local The different types of routes are:
• static - show ip route static is equivalent to the net ip
display static_routes.
• default-gateway - Does not have a legacy equivalent,
but does display the same information provided by the
default gateway box on the IP configure Web page.
• local - Shows all non-static (and omits the default
gateway line) from the output. You may enter a
destination IP address and/or an interface name that will
be matched against the table of interest. If you enter show
ip route local 111.111.111.111 Ethernet, then the local
routes will be searched for a destination address of
111.111.111.111 that is associated with the Ethernet
Management Interface. You may enter any combination
of local, destination IP address and interface.
dest-ip-addresses The IP addresses of the ARP cache.
if-name The name of the interface for the ARP cache.