Avaya Cajun P550R - Manual (Page 394)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 20-7
Policy
Assign a priority of 2 to all TCP
traffic that has a:
• Source IP address in the 1.1
subnet
• Source port that is greater
than 24
• Destination IP address in the
6.6 subnet
• Destination port of 23
access-list MyAccessList2 3 permit
use-priority 2 tcp 1.1.0.0 0.0.255.255
gt 24 6.6.0.0 0.0.255.255 eq 23
• Replace the existing DSCP of
packets with a DSCP of 12 for
all traffic that has a source IP
address of 199.93.238.83.
• Mask the three least
significant bits of the DSCP.
access-list MyAccessList2 4 permit
remark l2 mask ip host
199.93.238.83 any
Replace the existing DSCP of
the packet with a DSCP of 24
for all ICMP traffic that has a:
• Source IP address of 2.2.2.2
• Destination IP address of
4.4.4.4
access-list MyAccessList2 5 permit
remark-diffserv 24 icmp host 2.2.2.2
host 4.4.4.4
Assign a priority of 6 to all TCP
traffic that has a:
• Source IP address in the
10.10.10 subnet
• Destination IP address in the
11.11.11 subnet
• Destination port of 1
access-list MyAccessList2 6 permit
use-priority 6 tcp 10.10.10.0
0.0.0.255 11.11.11.0 0.0.0.255 eq 1
Use the layer 2 priority in the
packet to classify all UDP traffic access-list MyAccessList2 7 permit
use-l2 udp any any
To . . . Continued Enter . . .
2 of 3