Avaya Cajun P550R - Manual (Page 462)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 23-5
80-Series QoS
Sample Output:
Standard ACL
Rules
The following table provides examples of standard ACL rules.
any A destination of 0.0.0.0 and a
destination-wildcard of 255.255.255.255
host The destination IP address that you want
to assign a priority to.
[{lt | eq | gt
| range
}] A destination port or range of destination
ports that pass data between two hosts or
switches using the Transmission Control
Protocol (TCP) or the User Datagram
Protocol (UDP).
Enter a number between 0 and 65,535.
For a complete list of well-known port
numbers, see the following URL:
http://www.iana.org/assignments/
port-numbers
[established] Permits TCP connections to be
established that match the rule.
Table 23-1. Keywords, Arguments, and Options
Keyword, Argument
or Option Definition
4 of 4
Table 23-2. Examples: Standard ACL Rules
To . . . Enter . . .
• Use the DSCP in the packet to
classify all traffic that has a
source IP address in the 10.10.60
subnet.
• Mask the three least significant
bits of the DSCP.
access-list MyAccessList1 4
permit use-diffserv mask
10.10.60.0 0.0.0.255
Assign a priority of 7 to all traffic
that has a source IP address in the
10.10.70 subnet. access-list MyAccessList1 5
permit use-priority 7 10.10.70.0
0.0.0.255
• Replace the existing DSCP with a
DSCP of 5 for all traffic that has a
source IP address in the 10.10.80
subnet.
• Mask the three least significant
bits of the DSCP
access-list MyAccessList1 6
permit remark-diffserv 5 mask
10.10.80.0 0.0.0.255
1 of 2