Avaya Cajun P550R - Manual (Page 333)

Chapter 16
16-8 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
logging traps
Command Mode
Configure
Description
Configures the type of syslog messages sent to SNMP trap receivers.
The no form of this command disables the type specified. The default
is: [{start|system|config|temp|resource|fan|power|redundant_cpu|
unknown_mac|service_port|auth_failure| bridge_stat|switch_fabric}]
Syntax
Table 16-6. Parameters, Keywords, Arguments
Sample Output
The following example sends all of the switch_fabric syslog messages
to the SNMP trap receivers.
#
logging traps switch_fabric
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Set: logging traps [{start|system|config|temp|fan|power|redundant_cpu
resource|service_port|user_port|auth_failure|ridge_stat|switch_fabric|
unknown_mac}]
To Set to
Default
Value: [no] logging traps
[{start|system|config|temp|fan|power|redundant_cpu
resource|service_port|user_port|auth_failure|ridge_stat|switch_fabric|
unknown_mac}]
Name Definition
start|system...
|switch_fabric The types of syslog messages sent to SNMP trap receivers.