Avaya Cajun P550R - Manual (Page 389)

Chapter 20
20-2 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
access-list
Command Mode
Configuration
Description
Creates a rule in an access control list (ACL). The rule that you set is
applied on all of the ports on the switch.
* Note: You must enable the ACL on which you want to set a
rule. Only one ACL can be enabled at a time.
Syntax
To create a
standard ACL
rule: access-list {permit [{use-priority
| use-diffserv [mask] | remark-diffserv [mask] | use-
l2}] | deny | fwd1 | fwd2 | fwd3 | fwd4 | fwd5 | fwd6 | fwd7 | fwd8}
{ | any | host }
To create an
extended
ACL rule: access-list {permit [{use-priority
| use-diffserv [mask] | remark-diffserv [mask] | use-
l2}] | deny | fwd1 | fwd2 | fwd3 | fwd4 | fwd5 | fwd6 | fwd7 | fwd8}
{ | any | host ip-addr>} [{lt | eq | gt | range }]
{ | any | host } [{lt |
eq | gt | range }] [established]
Table 20-1. Parameters, Keywords, and Arguments
Keyword, Argument
or Option Definition
A unique name that identifies the access
control list. 1-99 is the standard value
range: 100-199 is the extended value
range.
The rule number within the access list.
permit Forwards the packet without changing its
priority.
use-priority Assigns the default layer 3 priority that
you define in the following
parameter to the packet.
The default layer 3 priority. Enter a
number between 0 and 7.