Avaya Cajun P550R - Manual (Page 653)

Chapter 32
32-8 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
set vtp-snooping domain
Command Mode
Configure
Description
Defines the VTP domain name from which the switch is to learn
from Cisco VTP frames. The clear form of this command can be used
to clear any learned or defined domain name. The default is the
domain name is initialized to a NULL string when starting with
default parameters.
Guidelines
The domain name can be automatically learned in approximately
learned in approximately 5 or less minutes from the Cisco VTP
server, provided this switch’s vtp-domain-name is Null and its vtp-
snooping state is set to "Enable."
Syntax
Table 32-4 lists the parameters, keywords, and arguments for the set
vtp snooping command.
Table 32-4. Parameters, Keywords, Arguments
Sample Output
The following example set the VTP snooping domain name to
Corporate.
# set vtp-snooping domain Corporate
vtp-snooping parameter modified.
#
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: set vtp-snooping domain
To Disable: clear vtp-snooping domain
Name Definition
name The Cisco VTP domain name to which this switch is to listen for VTP messages.