Avaya Cajun P550R - Manual (Page 508)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 24-7
RADIUS
set radius authentication server
Command Mode
Configure
Description
Sets either the primary or secondary RADIUS server settings.
Syntax
Table 24-1. Parameters, Keywords, Arguments
Sample Output
The following command sets the RADIUS authentication server at IP
address 192.157.1.0 to ‘secret primary’.
# set radius authentication server
192.157.1.0 ‘secret primary’
Systems
P550R/P580/P880/P882
To set RADIUS
authentication server
settings: set radius authentication server
[encrypted-type1] [{primary | secondary}]
To clear the RADIUS
authentication server: clear radius authentication server [{primary | secondary}]
Name Definition
ip-addr IP Address of the RADIUS server.
shared-secret Case sensitive shared secret. This must be exactly the
same as on the RADIUS server. Spaces are not allowed.
encrypted-type1 Do not use this option. This option is used by the switch
when saving passwords in the startup.txt file.
primary | secondary Specifies that the settings be applied to the primary or
secondary RADIUS server. If committed, primary is
assumed.