Avaya Cajun P550R - Manual (Page 464)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 23-7
80-Series QoS
Assign a priority of 2 to all TCP
traffic that has a:
• Source IP address in the 1.1
subnet
• Source port that is greater than
24
• Destination IP address in the 6.6
subnet
• Destination port of 23
access-list MyAccessList2 3
permit use-priority 2 tcp
1.1.0.0 0.0.255.255 gt 24 6.6.0.0
0.0.255.255 eq 23
• Replace the existing DSCP of
packets with a DSCP of 12 for all
traffic that has a source IP
address of 199.93.238.83.
• Mask the three least significant
bits of the DSCP.
access-list MyAccessList2 4
permit remark l2 mask ip host
199.93.238.83 any
Replace the existing DSCP of the
packet with a DSCP of 24 for all
ICMP traffic that has a:
• Source IP address of 2.2.2.2
• Destination IP address of 4.4.4.4
access-list MyAccessList2 5
permit remark 24 icmp host
2.2.2.2 host 4.4.4.4
Assign a priority of 6 to all TCP
traffic that has a:
• Source IP address in the 10.10.10
subnet
• Destination IP address in the
11.11.11 subnet
• Destination port of 1
access-list MyAccessList2 6
permit use-priority 6 tcp
10.10.10.0 0.0.0.255 11.11.11.0
0.0.0.255 eq 1
Use the layer 2 priority in the
packet to classify all UDP traffic access-list MyAccessList2 7
permit use-l2 udp any any
Table 2. Examples: Extended ACL Rules
To . . . Enter . . .
2 of 3