Avaya Cajun P550R - Manual (Page 247)

Chapter 12
12-30 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
ipx send-receive-mode
Command Mode
Interface
Description
Sets the RIP/SAP send and receive characteristics of the IPX
interface. The no form of this command restores the default, which
is talk-listen.
Syntax
Table 12-13. Parameters, Keywords, Arguments
Sample Output
The following example sets the RIP send-receive characteristics for
an interface labeled “boston” to talk-listen.
(config-if:boston)# ipx send-receive-mode rip
talk-listen
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: ipx send-receive-mode {rip|sap} {talk-only| listen-only|talk-
listen}
To Disable: [no] ipx send-receive-mode {rip|sap}
Name Definition
rip|sap Specify RIP or SAP and indicate the send-receive characteristic:
• talk-only - RIP or SAP only transmits updates on the interface and
does not receive them. Does not send RIP or SAP requests.
• listen-only - RIP or SAP only receives updates on the interface and
does not transmit them.
• talk-listen - RIP or SAP transmits and receives updates on the
interface.