Avaya Cajun P550R - Manual (Page 540)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 26-15
Spanning Tree Protocol
show spantree port
Command Mode
User
Description
Shows the port attributes for all bridge ports of a particular bridge.
Syntax
Table 26-11. Parameters, Keywords, Arguments
Sample Output
The following example displays the port attributes for the bridge
ports on the VLAN configured for 802.1D.
> show spantree port vlan 802.1D
Name/Vlan Status RootPrt RootCst MaxAge HelloTime FwdDly TopChngs
802.1D Enabled 0 0 20 2 15 0
BridgeId = 0x8000F00D04291400
DesignatedRoot = 0x8000F00D04291400
Time Since Topology Change (hh:mm:ss) = 02:17:34
Ports in Bridge “802.1D”
Number Module/Port State Priority Enable Cost DesigPort FwdTrans
58 3/1 Down 0x80 Enabled 4 0x0000 0
DesignatedBridge = 0x800202E03BD458000
77 3/2 Down 0x80 Enabled 4 0x0000 0
DesignatedBridge = 0x800202E03BD458000
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To View: show spantree port {802.1D | vlan {}}
Name Definition
802.1D Indicates an 802.1D bridge which can only be
displayed in 802.1D Config Mode.
vlan-id Configure a per-vlan or dual-layer bridge by using
the VLAN’s vlan ID. VLAN bridges can only be
viewed when in per-vlan or dual-layer mode.