Avaya Cajun P550R - Manual (Page 544)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 27-3
Switch Fabric
set fabric enable-redundant-element
Command Mode
Configure
Description
Allows you to enable the indicated redundant element.
This command does not have reverse mapping. It is not written to
the running or startup configuration file. The configuration is both
user and run-time modified.
Syntax
* Note: This command is for debug purposes only and is not
recommended for use in a production environment.
Table 27-2. Parameters, Keywords, Arguments
Sample Output
The following example sets the #3 element to on.
# set fabric enable-redundant-element
normal 3
Systems
Avaya P550R/P580/P880/P882 Multiservice Switches
To Enable: set fabric enable-redundant-element {normal |1|2|3|4|5|6}
Name Definition
normal |1|2|3|4|5|6 Required parameter.
• Normal means that the normally enabled redundant
element is turned on.
• 1-6 means that element associated with the number
is turned on.