Avaya Cajun P550R - Manual (Page 118)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 7-15
DVMRP
ip multicast prune-source
Command Mode
Interface
Description
Configures the host address used in DVMRP prune packets
forwarded on this interface. The no form of this command restores
the default, which is: host-addr.
Syntax
Table 7-12. Parameters, Keywords, Arguments
Sample Output
The following example configures the DVRMP prune
packets to the host address for interface 1.
(configure if:1)# ip multicast
prune-source host-addr
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: ip multicast prune-source {host-addr|network-addr}
To Disable: [no] ip multicast prune-source
Name Definition
host-addr The full host address is used in the prune packet for
the source address.
network-addr Only the network portion of the address is used in the
prune packet.