Avaya Cajun P550R - Manual (Page 532)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 26-7
Spanning Tree Protocol
set spantree port-top-change-detection
Command Mode
Configuration
Description
Enables or disables the topology port change detection ability of a
bridge port. The default state is enabled.
Syntax
Table 26-6. Parameters, Keywords, Arguments
Sample Output
The following example disables spanning tree port topology change
detection.
To Enable: set spantree port-top-change-detection [… [,] port-range>]] {enable | disable} {802.1D | vlan { | name name>}}
Name Definition
mod-port-range Specifies the module and the port range.
enable|disable Enable or disable topology change detection for
the bridge port.
802.1D Configure the IEEE 802.1D Legacy Bridge.
Note: The 802.1D bridge can only be modified when
in the IEEE config mode.
vlan-id Configure a per-vlan or dual-layer bridge by using
the VLAN’s vlan ID.
Note: LAN bridges can only be modified when in
per-vlan or dual-layer mode.
vlan-name Configure a per-vlan or dual-layer bridge by using
the VLAN’s name.
Note: VLAN bridges can only be modified when in
per-vlan or dual-layer mode.