Set vlan (frame format), Set vlan (frame format) -5, Command mode – Avaya Cajun P550R User Manual

Page 650: Description, Guidelines, Syntax

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1

32-5

VLAN

set vlan (frame format)

Command Mode

Configure

Description

This command modifies the frame tagging format of the switch
port(s) bound to the specified VLAN.

Guidelines

There are two forms of the command.

—

set vlan …: Modifies the frame format for the
specified switch port(s) on the VLAN specified by id>.

—

set vlan name …: Modifies the frame
format for the specified switch port(s) on the VLAN
specified by .

The switch port argument(s) take any number of switch port
specifications separated by either commas or whitespace. The two
different switch port specifications are shown below.
individual switch port: /

■

switch port range: /-

Syntax

Table 32-3

lists the parameters, keywords, and arguments for the set

vlan (frame format) command.

Table 32-3. Parameters, Keywords, Arguments

To Enable:

set vlan { | name } range>[...,] frame-format {clear | from-port}

Name

Definition

vlan-id

Specifies the VLAN the switch port is bound to by its VLAN ID.

vlan-name

Specifies the VLAN the switch port is bound to by its name.