Avaya Cajun P550R - Manual (Page 520)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 25-7
SNMP
snmp set
Command Mode
Configuration
Description
Performs an SNMP set on an MIB Object within the switch.
Syntax
Table 25-4. Parameters, Keywords, and Arguments
Sample Output
The following example sets the MIB object ‘sysContact’ to “System
Administrator”.
# snmp set sysContact "System
Administrator"
Systems
Avaya Multiservice Switches
To Enable: snmp set {|}
Name Definition
OID IB Object Identifier (for example: 1.3.6.x.x...).
mib-object-name The name of a MIB object defined within a MIB file
(for example: sysName, sysContact).
set-value The value you to which you want to set this snmp
object.