Avaya Cajun P550R - Manual (Page 515)

Chapter 25
25-2 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
show snmp
Command Mode
Configure
Description
Displays the list of SNMP Community names.
Syntax
Table 25-1. Parameters, Keywords, Arguments
Sample Output
The following command displays the list of SNMP community
names set on the switch.
# show snmp
String IP Address Access Security Traps
-------------------------------- --------------- ------ --------
public ***.***.***.*** ro Normal disable
rwcomm 10.1.1.0 rw Normal enable
admincomm ***.***.***.*** rw Admin disable
Systems
Avaya Multiservice Switch
To Enable: show snmp
Name Definition
string The SNMP Community
IP address The IP Address of the trap receiver associated with
this SNMP Community string. If is not configured
asterisks are displayed (***.***.***.***)
access The access level for the SNMP community string.
(none -- access level is disabled, ro - read-only
access, rw - read-write access)
security The security level associated with this community
string.
traps Indicates if this SNMP community is associated with
a trap recover.