Avaya Cajun P550R - Manual (Page 524)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 25-11
SNMP
snmp walk
Command Mode
Configure
Description
Allows a walk of the entire SNMP table (or an optional start at the
OID or Mib Name specified) by issuing a series of SNMP next
operations.
Syntax
Table 25-8. Parameters, Keywords, Arguments
Sample Output
The following example does an SNMP walk through sysObject ID
1.3.6.1.2.1.1.2.0:
# snmp walk
sysDescr (1.3.6.1.2.1.1.1.0)
sysObjectID (1.3.6.1.2.1.1.2.0) 0.0.0.0.0.0.0.0.0.0
sysUpTime (1.3.6.1.2.1.1.3.0) 16977784
sysContact (1.3.6.1.2.1.1.4.0) System Administrator
sysName (1.3.6.1.2.1.1.5.0) Cajun
sysLocation (1.3.6.1.2.1.1.6.0) [Location Not Set]
sysServices (1.3.6.1.2.1.1.7.0) 3
ifNumber (1.3.6.1.2.1.2.1.0) 22
ifIndex (1.3.6.1.2.1.2.2.1.1.1) 1
Systems
Avaya Multiservice Switches
To Enable: snmp walk {|}
Name Definition
OID IB Object Identifier (for example: 1.3.6.x.x...).
mib-object-name The name of a MIB object defined within a MIB file
(for example: sysName, sysContact)