Avaya Cajun P550R - Manual (Page 131)

Chapter 8
8-2 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
set huntgroup
Command Mode
Configure
Description
Creates a huntgroup, modify an existing huntgroup or remove a
huntgroup. If no load-sharing value is specified, then a huntgroup is
created with load-sharing enabled. Use the clear huntgroup form of
this command to remove a huntgroup.
Syntax
Table 8-1. Parameters, Keywords, Arguments
Sample Output
The following example creates huntgroup hg1 and disables load-
sharing.
(configure)# set huntgroup hg1 load-sharing disable
HuntGroup “hg1” created
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: set huntgroup [load-sharing {enable|disable}]
To Disable: clear huntgroup
Name Definition
huntgroup-name The unique string used to identify a huntgroup. If the
name is not unique to the huntgroup, then it is assumed
that an existing huntgroup is being modified.
load-sharing The load sharing capability.
• enable|disable - Enables or disables load sharing.