Avaya Cajun P550R - Manual (Page 528)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 26-3
Spanning Tree Protocol
set spantree config
Command Mode
Configuration
Description
Sets the Spanning Tree Protocol configuration. The default setting is
per-VLAN.
Syntax
Table 26-2. Parameters, Keywords, Arguments
Sample Output
The following example sets the spanning tree protocol to ieee.
# set spantree config ieee
Config successfully set to ieee
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: set spantree config {ieee|per-vlan|dual-layer|disable}
Name Definition
ieee The entire switch is a single IEEE 802.1D-
compliant bridge.
per-vlan Each VLAN functions as a separate IEEE 802.1D-
compliant bridge. VLAN bridges can only be
displayed when in per-vlan or dual-layer mode.
dual-layer A proprietary version of per-VLAN, where the vlan
id is embedded as a tag within the bridge PDUs.
disable Disables spanning tree on the switch.