Avaya Cajun P550R - Manual (Page 373)

Chapter 19
19-26 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
ip ospf router-id
Command Mode
Interface
Description
To set the router-id for the system, use the ip ospf router-id
command. Use the no form of this command, to Revert to the
system default (the lowest IP address configured on the system).
* Note: OSPF must be disabled for this command to take effect.
If OSPF is enable on the system the change will not take
effect until OSPF is stopped and started again.
Syntaxx
Table 19-18. Parameters, Keywords, Arguments
Sample Output
The following command sets the router id for interface 123 to
10.0.8.123.
>(config-If:123)#ip ospf router-id 10.0.7.123
Systems
Avaya P550R/P580/P880/P882 Multiservice Switches.
To Enable: ip ospf router-id
To Disable: [no] ip ospf router-id
Name Definition
router-id IP address that represents the router-id for the system.