Avaya Cajun P550R - Manual (Page 331)

Chapter 16
16-6 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
logging protocol event
Command Mode
: Configure
Description
Configure the Protocol Event Management System. The no form of
this command disables the specified event logging level. The default
state is that protocol events are all disabled.
Syntax
Table 16-4. Parameters, Keywords, Arguments
Sample Output
The following example logs all of the LDAP fault messages.
# logging protocol event ldap
fault
Completed set configuration for protocol
events.
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Set: logging protocol event {rip|ospf|ldap|cli|snmp|appletalk}
vrrp|{fault|error|warning|info|trace|debug}
To Set to
Default
Value: [no] logging protocol event {rip|ospf|ldap|cli|snmp|appletalk}
vrrp|{fault|error|warning|info|trace|debug}
Name Definition
rip|ospf|ldap|cli|snmp|appletal
k}
vrrp|{fault|error|warning|info|
trace|debug Indicates the protocol type (RIP, OSPF, LDAP or
Appletalk) and the level of messages to log.