Avaya Cajun P550R - Manual (Page 236)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 12-19
IPX
ipx rip-multiplier
Command Mode
Interface
Description
Sets the interval at which a network’s RIP entry ages out. The no
form of this command restores the default. The default value is three
times the RIP update interval.
Syntax
Table 12-7. Parameters, Keywords, Arguments
Sample Output
The following example sets the IPX RIP age-out interval on an
interface labeled “boston” to 40.
(config-if:boston)# ipx rip-multiplier 40
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: ipx rip-multiplier
To Disable: [no] ipx rip-multiplier
Name Definition
multiplier The multiplier used to calculate the interval at which RIP
routing table entries age out. This can be any positive
number.
The value you specify is multiplied by the RIP update
interval to determine the aging-out interval.