Avaya Cajun P550R - Manual (Page 255)

Chapter 12
12-38 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
show ipx interface
Command Mode
User
Description
Displays the details of IPX interfaces configured in the IOS software
and the parameters configured on each interface.
Syntax
Table 12-19. Parameters, Keywords, Arguments
Sample Output
The following is an example of the of the output that displays after
you enter the
show ipx interface command.
> show ipx interface 10005129
10005129 is up, and administratively up
On vlan ipxServer, is up
IPX address is 10005129.02:e0:3b:d4:48:03,
encapsulation type Ethernet SNAP
MTU is 1492 bytes
Delay of this Novell network, in ticks, is 1
IPX Type 20 propagation packet forwarding
mode is set to Inbound
IPX RIP is enabled on this interface
IPX RIP periodic update packets have an
interpacket gap of 55 msec
IPX RIP updates are sent with up to 50
networks per packet
Sending of IPX RIP triggered updates is
enables
IPX RIP update interval is 60 seconds
IPX RIP aging interval multiplier is 3
.
.
.
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To
View: show ipx interface []
Name Definition
intf-name The name of the interface to show.