Avaya Cajun P550R - Manual (Page 407)

Chapter 21
21-4 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
set port auto-flush
Command Mode
Configuration
Description
When auto-flush is enabled and the link to a port fails, all entries in
the address forwarding table that were learned for this port will be
marked invalid. The default value for auto-flush is disabled.
Syntax
Sample Output
The following example enables auto-flush for port 2, on module 4.
Avaya (configure) #set port auto-flush 4/2 enable
Port auto-flush set successful: 4/2.
Systems
Avaya P550R, P580, P880, and P882 Multiservice Switches.
To enable
auto-flush: set port auto-flush | range> enable
To disable
auto-flush: set port auto-flush | range> disable
Table 21-2. Parameters, Keywords, Arguments
Name Definition
The module number on which you want to set auto-
flush. Auto-flush can be set at the module level or
port level.
The port, or port range on which you want to enable
auto-flush.