Avaya Cajun P550R - Manual (Page 363)

Chapter 19
19-16 Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
ip ospf cost
Command Mode
Interface
Description
Specifies the cost of sending a packet on an interface. The no form
of this command sets the cost to default value of 1.
Syntax
Table 19-11. Parameters, Keywords, Arguments
Sample Output
The following command enables the cost of sending a packet on an
interface to 100.
>(config-I:intf3)#ip ospf cost 100
Systems
Avaya P550R/P580/P880/P882 Multiservice Switches.
To Enable: ip ospf cost
To Disable: [no] ip ospf cost
Name Definition
cost Unsigned integer value expressed as the link state metric.
It can be a value in the range 1 to 65535.