Set fabric configure-redundant-hardware, Set fabric configure-redundant-hardware -2 – Avaya Cajun P550R User Manual
Page 543
Chapter 27
27-2
Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
set fabric configure-redundant-hardware
Command Mode
Configure
Description
Allows you to enable the configuration of redundant (switch fabric)
hardware. The default state is disabled.
This command does not have reverse mapping. It is not written to
the running or startup configuration file. The configuration is both
user and
run-time modified.
Syntax
Table 27-1. Parameters, Keywords, Arguments
Sample Output
The following example sets the redundant hardware to disabled.
disable
Systems
Avaya P550R/P580/P880/P882 Multiservice Switches
To Enable:
set fabric configure-redundant-hardware {enable|disable}
Name
Definition
enable|disable
Required parameter indicating that the setting for the
redundant hardware is either enabled or disabled.