Show aft instance, Show aft instance -21, Command mode – Avaya Cajun P550R User Manual
Page 44: Description, Syntax, Sample output, Systems
Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1
2-21
AFT
show aft instance
Command Mode
User
Description
Displays the AFT instance for a particular VLAN or show all AFT
instances for all VLANs. If no VLAN parameter is specified, all
instances show on the switch.
Syntax
Table 2-15. Parameters, Keywords, Arguments
Sample Output
The following example displays the aft instance configuration table.
> show aft instance
AFT Instance Configuration:
===========================
Instance for Vlan “Default” (vlanID 1)
AutoSizeHT: true
UseConfHTsize: false
KeepInvalidInCol: false
UseInvalidInBktSizing: true
KeepInvalidInBkt: false
ConfigHTsize: 1024
Instance for Vlan “Discard” (vlanID 4097)
AutoSizeHT: false
UseConfHTsize: false
KeepInvalidInCol: false
UseInvalidInBktSizing: true
KeepInvalidInBkt: false
ConfigHTsize: 1
Systems
Avaya P550R/P580/P880/P882 Multiservice Switches.
To Enable:
show aft instance [vlan {
Name
Definition
vlan-id
Specifies the aft instance associated with the ID of this
VLAN. Displays the AFT instance information for this
VLAN ID.
name
Displays the AFT Instance information for the VLAN
identified by “name”.