Avaya Cajun P550R - Manual (Page 534)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 26-9
Spanning Tree Protocol
set spantree portcost
Command Mode
Configuration
Description
Sets the path cost of a particular bridge port. The defaults are: 100
for a 10MB port, 19 for a 100 MB port, and 4 for a 1 GB port.
Syntax
Table 26-7. Parameters, Keywords, Arguments
Sample Output
The following example sets the path cost for the bridge.
# set spantree portcost 5/1 15 802.1D
Port 5/1 path cost successfully set to 15.
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: set spantree portcost […[,] ]
{802.1D|vlan {| name }}
Name Definition
mod-port-range Specifies the module and the port range.
cost-value The path cost for the bridge port.
802.1D Configure the IEEE 802.1D Legacy Bridge.
Note: The 802.1D bridge can only be modified when
in the IEEE config mode.
vlan-id Configure a per-vlan or dual-layer bridge by using
the VLAN’s vlan ID.
Note: LAN bridges can only be modified when in per-
vlan or dual-layer mode.
vlan-name Configure a per-vlan or dual-layer bridge by using
the VLAN’s name.
Note: VLAN bridges can only be modified when in
per-vlan or dual-layer mode.