Avaya Cajun P550R - Manual (Page 50)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 3-3
Appletalk
appletalk access-list
Command Mode
Configuration
Description
Create an Appletalk Access List. The no form of this
command removes an Appletalk Access List. The default is
to permit all zones and all NBP objects.
The access list applies to either an Appletalk zone name or to the
object portion of an NBP entity. To delete a zone from the zone list,
delete the static route first.
Syntax
Table 3-2. Parameters, Keywords, Arguments
To Enable: appletalk access-list
{{deny|permit} {zone|nbp} |additional-
zones|additional-nbps}
To Disable: [no] appletalk access-list
Name Definition
access-list
• access-list-number
• deny | permit
• zone | nbp
Number of an access list.
• access-list-number is the identifier (in decimal)
of the access list. The access-list-number for nbp
must be between 600 and 631. The access-list-
number for zone must be between 632 and 663.
• Deny does not permit access when conditions
match. Specifying “deny” denies access if the
conditions are matched; specifying “permit”
permits access if the conditions are matched.
• Permit allows access when conditions match.
• Zone applies the access-list to Appletalk Zone
names. Specifying “zone” indicates that this access
list applies to Appletalk Zone Names. Specifying
“nbp” indicates that this access list applies to the
name field of Appletalk Name Binding Protocol
(NBP) entities.
• Nbp applies the access-list to the name field of
Appletalk Naming Binding Protocol (NBP)
entities.