Avaya Cajun P550R - Manual (Page 244)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 12-27
IPX
Sample Output
The following example:
■
sets the precedence to 2
■
sets the filter-name to netbios
■
sets the service type to 1
■
applies filters to SAP packets in both directions (both)
■
adds the service to the service table (allow)
■
sets the filter hops to 4
on an interface labeled “boston”.
(config-if:boston)# ipx sap-name-filter 2
netbios 1 both allow 4
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
filter|allow The action to take for the IPX service.
• filter - Do not add the service to the service table (inbound
SAP packets) or do not advertise the service (outbound SAP
packets).
• allow - Add the service to the service table (inbound SAP
packets) or advertise the service (outbound SAP packets).
filter-hops The number of hops to get to the service in the service table
(inbound SAP packets) or in the advertised information (outbound
SAP packets). The range is 0 to 16 hops.