Avaya Cajun P550R - Manual (Page 164)

Command Reference for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 10-9
IP
ip bootp-dhcp
Command Mode
Configure
Description
Enables bootp and dhcp service and configures the bootp/dhcp
server. The no form of this command disables bootp/dhcp. The
default state is disabled.
Syntax
Table 10-6. Parameters, Keywords, Arguments
Sample Output
The following example enables relaying bootp and dhcp service to
the bootp-dhcp server.
# ip bootp-dhcp relay
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable ip bootp-dhcp
ip bootp-dhcp server
To Disable: [no] ip bootp-dhcp
[no] ip bootp-dhcp server
Name Definition
agent-info Enables the BOOT/DHCP Option 82 Agent info. Identifies the IP address and, if
available, the system name of the switch.
circuit-info Enables the BOOT/DHCP option 82 circuit-info. Identifies the slot and physical
port number from which the BOOT/DHCP request was received.
relay Enables/configures relaying the BOOTP/DHCP service to the BOOTP/DHCP
server.
server Adds a bootp/dhcp server ip address.