Avaya Cajun P550R - Manual (Page 352)

Command Reference Guide for the Avaya P550R, P580, P880, and P882 Multiservice Switches, v5.3.1 19-5
OSPF
area default-cost
Command Mode
Router-OSPF
Description
Defines the cost for routes advertised into stub area by an area
border router. To restore the default value, use the no form of this
command.
Syntax
Table 19-3. Parameters, Keywords, Arguments
Sample Output
The following command sets an area Default Cost of 3 on OSPF set
on the specified router.
>(configure router:ospf)# area 2.0.0.0
default-cost 3
The following command removes an area Default Cost from OSPF
set on the specified router.
>(configure router:ospf)# no area 2.0.0.0
default-cost
Systems
Avaya P550R/P580/P880/P882 Multiservice Switch
To Enable: area default-cost
To Disable: [no] area default-cost
Name Definition
area-id A decimal value or IP address that identifies an OSPF area.
Use no area <area-id> to remove an area from the
software configuration.
cost A cost value of the area.